Specifications

76
Configuring Advanced Settings
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008
Schablone 2005_07_27
ì Select the required application from the Predefined applications list.
ì Click the Add button. The data for the required service is entered on the screen.
ì Select the chekbox in the Enabled column.
If the application you require is not in the list, you must enter the relevant data on the
screen manually:
ì Local protocol: Select the protocol that is to be monitored for outgoing traffic.
ì Local port: Enter the port that is to be monitored for outgoing traffic.
ì Public protocol: Select the protocol that is to be allowed for incoming data traffic.
ì Public port: Enter the port that is to be opened for incoming traffic.
You can enter a single port number, several individual port numbers separated by
commas, port blocks consisting of two port numbers separated by a dash, or any
combination of these, for example 80,90-140,180.
ì Comment: Enter a description to help you identify different entries.
ì Select the checkbos in the Enabled column.
ì Click the Delete button to delete an entry. Click the Add button to add a new entry.
ì Apply the settings by clicking OK.
Port Forwarding
If you configure Port Forwarding, the Giga762SX WLAN dsl outwardly assumes the role
of the server. It receives requests from remote users under its public IP address and auto-
matically redirects them to local PCs. The private IP addresses of the servers on the local
network remain protected.