Specifications

53
Security Setup Wizard
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008
Schablone 2005_07_27
SSID
For the wireless network components to be able to communicate with one another, you
must use the same SSID (Service Set Identifier).
The default SSID for the Giga762SX WLAN dsl is shown at the label on the bottom of the
device. For security reasons you can change this SSID and deactivate SSID broadcast. If
this option is enabled, the Giga762SX WLAN dsl will send the SSID in all data transfers
and the SSID of the Giga762SX WLAN dsl will be displayed on PCs that have a wireless
network adapter. In this case, unauthorised persons could use the SSID to gain access to
your network.
If you have performed a successful WPS registration before a manual configuration of
security data, this page shows the generated SSID. Make a note of this SSID. You will
need it to manually configure the wireless network adapters that do not support WPS.
ì If you are using WPS registration, click on Next >.
ì Enter a character string of your choice in the SSID field. The SSID is case-sensitive. It
can contain up to 32 characters. Use a combination of letters, digits and special char-
acters.
ì Deactivate SSID broadcast and make a note of the SSID. You will
need for further wireless connections to the Giga762SX WLAN
dsl.
ì Click Next >.
Note:
The connection to the wireless network adapters will be inter-
rupted until the new SSID has also been entered.