Specifications

52
Security Setup Wizard
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008
Schablone 2005_07_27
Assigning a password
In the first step of the configuration you can change the password for the user interface.
When the device is supplied, the configuration of your Giga762SX WLAN dsl is protected
with the admin password. To prevent unauthorised changes to the configuration, you
should change the password at regular intervals.
ì Enter the old password in the Current password field.
ì Enter the new password in the New password field and repeat the entry in the
Confirm new password field.
The password may contain up to 20 characters. Note case sensitivity. Avoid proper
names and all too obvious words. Use a combination of letters, digits and special
characters.
ì To go to the next step, click Next >
Note:
If you ever forget your password you will have to return the Giga762SX WLAN dsl to
its factory settings (page 127). Please bear in mind that this will restore all settings to
the factory configuration. The password will again be admin.