Specifications

158
Appendix
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008
Schablone 2005_07_27
The LAN LED on a con-
nected device does not light
up.
No LAN connection
ì Make sure the connected device is turned on.
ì Check whether the Ethernet cable is plugged in.
ì Check that you are using the right cable type
(CAT5) and that the cable is not too long (<100m).
ì Check that the network card on the connected
device and the cables are not defective. If neces-
sary, replace a defective network card or cable.
ì Use the Windows device manager (My Computer –
Properties) to check whether the network card is
functioning. If you see a red cross or a question
mark, the driver may not have been installed or
there is a resource conflict. Follow the Windows
instructions to remedy the problem.
You cannot connect to the
Internet.
ì Check whether the Connect manually option is
activated. If it is, connections cannot be opened
automatically.
ì Select Connect on demand or Always on.
Remember that this setting may lead to higher
costs if you are billed on the time used.
ì The connection may have been terminated manu-
ally with the Connect on demand option selected.
– Restore the connection again manually using the
Connect button or
– Restart the Giga762SX WLAN dsl.
In both cases, the Connect on demand setting will
be active again.
ì Check whether the data entered for your Internet
connection matches what your Internet service
provider has specified.
Symptom Possible cause and solutions