Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 55
Configuration language
Druck vom 24. 01.2001 17:00.28 torb-kon
IMPORT
The IMPORT statements on the system level apply to all hosts, if there is no IMPORT state-
ment with the same file name in the HOST statement.
The IMPORT statements on the host level apply accordingly to all applications, if there is
no IMPORT statement with the same parameters in the application.
The optional IMPORT statement has one parameter:
– filename
The IMPORT statement is transformed into the KDCDEF control statement OPTION DATA.
IN_CONVERTER
The IN_CONVERTER statement describes a converter function or converter class method
that is called if there is a message from a foreign open UTM application.
The IN_CONVERTER statement has the following parameters:
– FunctionId of the converter function or
– ClassId and ClassMethodId of the converter class method
INTERNETADDRESS
The INTERNETADRESS statement is used to specify the current Internet address of the host.
KEYVECTOR
The KEYVECTOR statement contains the keys for the following UTM areas:
– the global application semaphore (SEMKEY)
– the access key for the KAA shared memory segment (KAASHMKEY)
– the access key for communication (IPCSHMKEY)
– the access key for file accesses (CACHESHMKEY)
The KEYVECTOR statement has the following parameters:
– start key
– end key
For the areas of importance, see the CMX documentation [7].
The difference between the start key and end key must be large enough for all applications
on the host to have their own key. ❍❍●