Network Router User Manual

54 GINA V4.0 System Administrator Guide – September 2000
Configuration language
FOREIGN_SESSION
The FOREIGN_SESSION statement describes connections between a GINA application and
a foreign open UTM application. It comprises the following components:
– session type (LETTER); the generator currently supports LU6.1
– mapping (optional MAP_SYSTEM parameter)
MAP=
controls ASCII/EBCDIC conversion when exchanging unformatted messages with
other applications.
SYSTEM
open UTM converts the data in the message area from ASCII to EBCDIC prior to dis-
patch or from EBCDIC to ASCII following receipt. The message may only contain print-
able characters.
See the KDCDEF control statement SESCHA in [26].
–a SESSIONPOINT statement for the GINA application
–a SESSIONPOINT statement for the foreign open UTM application
HOST
The HOST statement describes the configuration of a host. The HOST statement comprises
the following components:
– host name
– optional: the CMX version of the host (default CMX040)
– optional: the UTM version of the host (default UTM040)
– optional: the flag RESERVE
– Internet address of the host (INTERNETADDRESS)
– shared memory and semaphore key (KEYVECTOR) (not OS_BS2000)
– available port numbers (PORTADDRESS) (not OS_BS2000)
– host-specific customizing statements
(ADMIN, CYCLICTIME, EVENTCONTROL, MAX, RMXA, START and START_RM)
– description of existing applications
Example HOST ( "Host2" )
{
INTERNETADDRESS ( 127.0.0.2 )
KEYVECTOR ( 5005, 5040 )
PORTADDRESSES ( 2000, 2100 )
...
}