Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 53
Configuration language
Druck vom 24. 01.2001 17:00.28 torb-kon
EVENTCONTROL
The EVENTCONTROL statement comprises the following components:
– CYCLE
– CHECK
– CANCEL
Each component is optional.
Example EVENTCONTROL
{
CYCLE ( 0, 0, 20, 0 )
CHECK ( 0, 2, 0, 0 )
CANCEL ( 3, 0, 0, 0 )
}
FOREIGN_APPLICATION
The FOREIGN_APPLICATION statement describes a foreign
open UTM application. It com-
prises the following components:
– OsId of the application (NUMBER, 1 ... 32767)
– LayerId of the application (NUMBER, 1 ... 32767)
– optional: a foreign application number
– user-friendly name of the application (LETTER))
Example FOREIGN_APPLICATION ( 1, 4, "FA1" )
FOREIGN_APPLICATION_NUMBER
The FOREIGN_APPLICATION_NUMBER statement summarizes a list of ADDRESS state-
ments: this list is referenced by means of a number. An ADDRESS statement defines the
following components:
– FunctionId of the converter function (NUMBER)
– TransactionCode of the application (LETTER)
– TransactionType of the application (LETTER)
– optional: ConverterId of the application (NUMBER).