Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 47

Configuration language

Druck vom 24. 01.2001 17:00.27 torb-kon

The ADDRESS statement describes how the GINA application is to be addressed by the for-

eign

open

UTM application. It has the following parameters:

– local name of the GINA application (LETTER)

– name of the local transaction code (LETTER)

APPLICATION

The APPLICATION statement describes a client which is connected via T-ORB/Client. It

comprises the following components:

– OsId of the application (NUMBER, 1 ... 32767)

– LayerId of the application (NUMBER, 1 ... 32767)

– User-friendly name of the application (LETTER)

– The REMOTE ﬂag can be speciﬁed as an option for a client connected via T-ORB/Client.

The REMOTE ﬂag classiﬁes a client as a remote client [31].

If the REMOTE ﬂag is not speciﬁed as the last parameter, a client is generated locally if

it only has local connections to servers; otherwise, a remote generation is created.

– A user ID and password can be speciﬁed. This information is generated automatically

if it is not speciﬁed explicitly.

Example APPLICATION ( 131, 1, "CmdTrm1" )

AREA

The AREA statements on the system level apply to all hosts, if there is no AREA statement

with the same data area name in the HOST statement.

The AREA statements on the host level apply accordingly to all applications, if there is no

AREA statement in the application.

The optional AREA statement has one mandatory parameter

– Data area name (LETTER)

and the following optional parameters

– "ACCESS" = "DIRECT" | "INDIRECT" (OS_UNIX, OS_WINNT)

– "LOAD-MODULE" = "lmodname" (OS_BS2000)

– "LOAD" = "STATIC" (OS_BS2000)

– "LOAD" = "(POOL,poolname)" (OS_BS2000)

– "LIB" = "omlname" (OS_BS2000)

Example AREA ( "area1", "ACCESS" = "DIRECT" )