Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 17
Installation
Druck vom 24. 01.2001 17:00.21 install
5b. The following steps are required if the GINA package is stored on the delivery CD in
compressed format:
◊ Copy the GINA package from the CD to an intermediate directory
cp < CD drive directory >/< gina package file name >.gz < intermediate
directory name >
◊ Unpack the file in the intermediate directory using gunzip.
◊ Install the unpacked GINA package
pkgadd -d < intermediate directory name >/< gina package file name >
You are then prompted to do the following:
◊ Select the GINA package to be installed.
◊ Specify the directory in which GINA is to be installed,
e.g. /opt/gina/ GINA
◊ Define users for this and the directories below:
e.g. gina as userid (default: root)
e.g. tmns as groupid (default: root)
◊ Specify the source directory from which GINA is installed.
< intermediate directory name >/< gina package file name >
The GINA package is then installed under /opt/gina/ GINA , the directory structure
created and the structure filled with the files.
3.3.2 UNIX / HP-UX
See UNIX (Solaris, SINIX) on page 16 for steps 1 through 4.
5. Insert the GINA delivery CD into the CD drive and install the uncompressed GINA pack-
age using the following command:
swinstall
The swinstall command opens a menu interface via which the aforementioned in-
formation is queried.
The GINA package is then installed, the directory structure created and the structure
filled with the files.