Network Router User Manual

10 GINA V4.0 System Administrator Guide – September 2000
Requirements
3.1 Requirements
The following third-party products are required to implement the GINA components.
Please note that the products listed may be based on other products, which must then like-
wise be installed. Up-to-date information on the products required can be found in the Re-
lease Notice included in the delivery. ❍❍●
● Generic++ V2.5 [11]
GINA requires the class library Generic++ V2.5, which is contained in the GINA scope
of supply and is installed under the name libsupport2.
● open UTM V5.0 and open UTM-Client V5.0
For communication and transaction monitoring, the T-ORB server uses the TP monitor
UTM. GINA Version 4.0 requires UTM Version open UTM (UNIX, NT, BS2000/OSD)
V5.0 or later [29].
To connect non-transaction-monitored applications (T-ORB client) to a transaction-
monitored server, the CPIC interface is used.
This requires the product open UTM-Client (UNIX, NT) V5.0A or later [36].
The software component UTM-D is also required when using GINA with BS2000.
● INFORMIX Dynamic Server 2000 (IDS.2000) V9.2
The Persistency Service in GINA V3.3 uses INFORMIX as the data storage system.
INFORMIX Dynamic Server 2000 [19] (UNIX & NT) and Client SDK 2.40 (UNIX and NT)
are required.
The XA interface [5] is required for the integrated use of T-ORB and the Persistency Ser-
vice. This interface is only integrated under UNIX in V9.2. Detailed information on cou-
pling T-ORB and the Persistency Service under WindowsNT can be found in chapter 6,
Compiling and linking, of the Developer Manual [13].