Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 161
Configuration language
Druck vom 24. 01.2001 17:00.57 torbkontux
The statement names APPDIR (78), ENVDIR, GINACONFIGDIR, TLOGDEVICE (64),
TUXCONFIG (64), TUXDIR (78) and QUEUEFILE (78) must be defined indirectly or directly
for all server machines. The numbers in brackets indicate the maximum number of charac-
ters permitted in the parameter value.
The statement names ENVFILE, LDBAL, LMID, MASTER, MODEL, OPTIONS and TYPE may
not be specified as these statements are generated automatically.
The statement names MAXDRT, MAXRFT and MAXRTDATA may not be specified as this func-
tionality is not used.
The statement names MESSAGES and PAGES are used to define the corresponding param-
eters of the qspacecreate utility routine.
The default values are "MESSAGES" = "100" and "PAGES" = "2048".
The statement name REQUESTQUEUE is used to control generation of the parameters
REPLYQ and RQADDR for each server application in the file ubbconfig.
The default value is "REQUESTQUEUE" = "N".
The REPLYQ parameter specifies whether a separate REPLY-QUEUE will be set up (values:
Y or N).
See TUXEDO Administration Guide [2], Section 3 Services, Servers & Server Groups.
The statement name TMQF_IDLETIME is used to control generation of the parameter -i
idltime for each TMQFORWARD server in the file ubbconfig. -i idletime is not gen-
erated if this statement is omitted.
The statement name TMQF_TRANSACTIONTIME is used to control generation of the param-
eter -t transactiontime for each TMQFORWARD server in the file ubbconfig. -t
transactiontime is not generated if this statement is omitted.
See TMQFORWARD – TUXEDO System/T Message Forwarding Server in [1].
The statement name CM_IDLETIME is used to control generation of the parameter
-i idltime for each conversational mode server in the file ubbconfig. -i idletime
is not generated if this statement is omitted.
The statement name CM_IDLETIME_MS is used to control generation of the parameter
-I idltime for each conversational mode server in the file ubbconfig. -I idletime
is not generated if this statement is omitted. CM_IDLETIME and CM_IDLETIME_MS are mu-
tually exclusive.
Example MAX ( "CM_IDLETIME_MS" = "570" )