Network Router User Manual

160 GINA V4.0 System Administrator Guide – September 2000
Configuration language
Example HOST ( "Host2" )
{
INTERNETADDRESS ( 127.0.0.2 )
KEYVECTOR ( 5005, 5040 )
PORTADDRESSES ( 2000, 2100 )
...
}
INTERNETADDRESS
The INTERNETADRESS statement is used to specify the current Internet address of the host.
or the relative domain name of the domain name system.
KEYVECTOR
The KEYVECTOR statement contains the keys for the BEATUXEDO areas:
– a key to identify IPC resources for the “Queue Space” for each host with server appli-
cations
The KEYVECTOR statement has the following parameters:
– start key
– end key
MAX
The MAX statement allows you to customize TP applications.
At system level, the MAX statement applies to all hosts if there is no MAX statement of the
same name in the HOST statement.
The MAX statements with the names CM_IDLETIME, CM_IDLETIME_MS, ENVDIR,
GINACONFIGDIR, MIN, MAX, REQUESTQUEUE,TMQF_IDLETIME and
TMQF_TRANSACTIONTIME at host level apply accordingly to all server applications.
The optional MAX statement has the following parameters:
– statement name (LETTER)
– value of the statement as a string
The statement name IPCKEY must be defined at system level.
If the configuration generator config-tux is called with the option -s, then GINACON-
FIGDIR must be defined at system level.