Network Router User Manual
152 GINA V4.0 System Administrator Guide – September 2000
Creating a configuration file using WinConfig
Moves menu
This menu allows the user to change the layout of the configuration file displayed in the
WinConfig main window.
Move Param
Among other things, the Moves menu permits a group of applications to be shifted
using the Right, Left, Up, Down menu items and the cursor keys. The Move
Param... menu item is used to define which applications belong to a group.
The following dialog window is opened when this menu item is called:
Figure 34 Dialog window: Move Param
A pattern can be entered in the upper input field by means of which the group of applications
is specified. WinConfig recognizes the same metacharacters (*, ? and .) in a pattern as
in the Link>Create Some menu item (see page 150).
In the lower input field, the user defines the distance by which a group of applications is to
be moved. The default value is 1.
The buttons in the dialog box execute the following actions:
OK The entered parameter values are confirmed.
Delete All parameter values are deleted.
Cancel The modified parameter values are discarded again.
Right, Left, Up, Down
You can use these menu items to move a group of applications (defined by the
Move Param... menu item, see page 152) to the right, left, top or bottom by a specific
delta (also specified using Param...). The movement can also be performed using the
cursor keys.
Grid on | off
You can move a group of applications in grid formation if you call the Grid on | off
menu. A mark at the lower edge of the open Moves menu (beside the Grid on | off
menu item) shows that grid formation is enabled.If you call this menu item again, the
grid format is disabled and the mark disappears again.