Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 143

Creating a configuration file using WinConfi

Druck vom 24. 01.2001 17:00.52 torb-kon

Dyn_Connect>not_inherit_for_hosts...

This menu item allows you to input the hosts which are not to inherit the

DYNAMIC_CONNECT statement from the system.

The following list window is displayed when this menu item is called:

Figure 30 Dialog window: Hosts (not inherit DYNAMIC_CONNECT)

The list window always displays all hosts which are not to inherit the DYNAMIC_CONNECT

statement from the system, i.e. when saving to a conﬁguration ﬁle, WinConfig generates

an empty DYNAMIC_CONNECT statement in the respective host block (if there are no host-

speciﬁc SCHEDULE entries). There are no default settings.

The current settings can be modiﬁed using the Del Statement and Add Statement but-

tons.

● Deleting a host entry

◊ Mark a host name in the display area with the left mouse button.

◊ Click on Del Statement with the left mouse button.

● Inserting a host entry

◊ Enter the host name beneath the display area.

◊ Click on Add Statement with the left mouse button.

The buttons in the list window execute the following actions:

OK The entered host name are conﬁrmed.

Cancel The modiﬁed host name are discarded again.