Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 141
Creating a configuration file using WinConfi
g
Druck vom 24. 01.2001 17:00.52 torb-kon
The buttons in the list window execute the following actions:
OK The entered MPOOL statements are confirmed.
Cancel The modified MPOOL statements are discarded again.
Dyn_Connect
This menu item supports the definition of connections which are to be used by non-
transaction-monitored dynamic clients for communication with transaction-monitored
T-ORB applications (see section 6.2 on page 46).
The Dyn_Connect menu item contains two submenu items:
Dyn_Connect>System...
This menu item allows you to customize the DYNAMIC_CONNECT statement.
The following list window is displayed when this menu item is called:
Figure 29 Dialog window: Dyn_Connect-System
The list window always displays the current entries for the DYNAMIC_CONNECT statement
for the system. There are no default settings. The entries displayed in the list window are
transferred to a configuration file as parameters of the DYNAMIC_CONNECT statement when
they are saved.
The current entries can be modified using the Del Statement and Add Statement but-
tons.
● Deleting an entry
◊ Mark an entry in the display area with the left mouse button.
◊ Click on Del Statement with the left mouse button.