Network Router User Manual

140 GINA V4.0 System Administrator Guide – September 2000
Creating a configuration file using WinConfig
Figure 28 Dialog window: MPOOL-Param
The following table describes the dialog window entries; the “Statement” column specifies
the corresponding statement that is generated by WinConfig when saving to a configura-
tion file.
The buttons in the dialog window execute the following actions:
OK The entered additional parameter values are confirmed.
Delete All additional parameter values are deleted.
Cancel The modified parameters are discarded again.
Parameter name Value Default Statement
Access Defines the access authorization.
Possible values:
DIRECT
INDIRECT
Selected via a pull-down menu.
- MPOOL
Lib Identifies the object module library when
switching programs using KDCLOAD.
None MPOOL
Page Sedecimal address in the form
X'xxxxxxxxx'
None MPOOL
Scope Defines the scope of the common memory
pool. Possible values:
GLOBAL
GROUP
Selected via a pull-down menu.
- MPOOL
Sharetab CSECT name of the KDCSHARE table to be
loaded in this common memory pool.
None MPOOL