Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 133
Creating a configuration file using WinConfi
g
Druck vom 24. 01.2001 17:00.49 torb-kon
The buttons in the dialog window execute the following actions:
OK The entered parameter values are confirmed.
If the three parameter values for High, Medium, Low are equal to 0,
WinConfig does not generate a PRIORITY statement. WinConfig out-
puts an error message if there is at least one parameter value equal to 0
and at least one parameter value not equal to 0.
Delete All parameter values are deleted.
Cancel The modified parameters are discarded again.