Network Router User Manual

132 GINA V4.0 System Administrator Guide – September 2000
Creating a configuration file using WinConfig
Priority...
The menu item is used to customize the PRIORITY statement in line with TAC class
control.
The following dialog window is displayed when this menu item is called:
Figure 22 Dialog window: Priority-System
The following table describes the dialog window entries; the “Statement” column specifies
the corresponding statement that is generated by WinConfig when saving to a configura-
tion file.
Parameter name Value Default Statement
High Maximum number, the number of
processes in the application that
can work concurrently with the TAC
class with the priority HIGH.
0 PRIORITY
Medium Maximum number, the number of
processes in the application that
can work concurrently with the TAC
class with the priority MEDIUM.
0 PRIORITY
Low Maximum number, the number of
processes in the application that
can work concurrently with the TAC
class with the priority LOW.
0 PRIORITY
Sync_Wait Specifies for which of the three TAC
classes synchronous calls are per-
mitted. Possible values:
HIGH, MEDIUM, LOW
Selected via a pull-down menu
- PRIORITY