Network Router User Manual

130 GINA V4.0 System Administrator Guide – September 2000
Creating a configuration file using WinConfig
Timer...
Customizes the statements for CYCLICTIME, CYCLICORDER, CYCLE, CHECK and
CANCEL.
The following dialog window is displayed when this menu item is called:
Figure 20 Dialog window: Timer system
The following table describes the dialog window entries; the “Statement” column specifies
the corresponding statement that is generated by WinConfig when saving to a configura-
tion file.
The time intervals are entered using four values for days, hours, minutes, seconds. Note
that the individual values must be separated by a dot.
The buttons in the dialog box execute the following actions:
OK The entered parameter values are confirmed.
Delete All parameter values are deleted.
Cancel The modified parameter values are discarded again.
Parameter name Value Default Statement
Cyclictime Time interval for activation of the
application-specific timer
none CYCLICTIME
Cyclicorder Maximum permitted cyclical tasks none CYCLICORDER
Cycle Time interval in which events on the
client that have not yet been deliv-
ered are checked
none CYCLE
Check Time interval after which an event
on a client is incorporated in the
check mechanism
none CHECK
Cancel Time interval after which an event
on a client expires
none CANCEL