Network Router User Manual

126 GINA V4.0 System Administrator Guide – September 2000
Creating a configuration file using WinConfig
MaxState...
Customizes the MAX statements for the system.
The following list window is displayed when this menu item is called:
Figure 16 Dialog window: MAX system
The list window always displays the current MAX settings for the system. Figure 15 shows
the default settings. The statements displayed in the list window are transferred to a config-
uration file when they are saved.
The current settings can be modified using the Del Statement and Add Statement but-
tons.
● Deleting a statement
◊ Mark a MAX statement in the display area with the left mouse button.
◊ Click on Del Statement with the left mouse button.
● Inserting a statement
◊ Enter the first and second parameters in the left or right input field beneath the display
area.
WinConfig always expects that both parameters will be entered.
◊ Click on Add Statement with the left mouse button.
Terminate the input of MAX statements with OK or Cancel. The dialog window closes.
The buttons execute the following actions:
OK The entered MAX statements are confirmed.
Cancel The modified MAX statements are discarded again.