Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 123
Creating a configuration file using WinConfi
g
Druck vom 24. 01.2001 17:00.46 torb-kon
System menu
This menu can be used to modify the customizing settings for the system.
Init System...
This menu entry permits the input of system-specific data for START_VALUE,
REPOSITORY and OPERATING_SYSTEM statements.
Three input fields are displayed in the dialog window when this menu item is activated:
Figure 14 Dialog window: Init System
The following table describes the dialog window entries; the “Statement” column specifies
the corresponding statement that is generated by WinConfig when saving to a configura-
tion file.
The buttons in the dialog window execute the following actions:
OK The entered parameter values are confirmed.
Delete All parameter values are deleted.
Cancel The entered parameter values are discarded again.
Parameter name Value Default Statement
OS Name of the operating system
Possible values:
UNIX, WINNT, BS2000
Selected via a pull-down menu
UNIX OPERATING_SYSTEM
Startvalue Start value of the first generation
number that is used in the genera-
tion of identifiers (see section 6.2
on page 46)
0 START_VALUE
Repository Name of the repository file (see
section 6.2 on page 46)
none REPOSITORY