Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 115

Creating a configuration file using WinConfi

Druck vom 24. 01.2001 17:00.43 torb-kon

The simplest way of entering the host name is to perform a drag-and-drop operation on the

host label:

◊ Click on the label of a host icon with the middle mouse button and drag the label into

the Hostname input ﬁeld by holding down the mouse key.

The buttons in the dialog window execute the following actions:

OK The entered parameter values are conﬁrmed.

Delete The corresponding TA application is deleted, i.e. the icon in the application

edit window disappears.

Cancel The entered parameter values are discarded again.

c) Editing foreign application parameters

Each foreign application in a conﬁguration is represented in the application edit window by

an icon. The name of the foreign application is displayed within the icon. The position of an

icon within the application edit window can be changed by clicking once on the relevant icon

with the middle mouse button. The icon tracks the movement of the mouse until you once

again press the middle mouse button.

Each new foreign application is generated using the pop-up menu of the right mouse button.

The new foreign application is represented by an icon that is displayed at the current mouse

position within the application edit window. Newly generated foreign applications do not yet

have a name within the icon.

The parameters can be edited by clicking on the foreign application icon with the left mouse

button. The following dialog window is opened via the icon:

Figure 10 Dialog window: Foreign application parameters