Network Router User Manual

GINA V4.0 System Administrator Guide – September 2000 113
Creating a configuration file using WinConfi
g
Druck vom 24. 01.2001 17:00.42 torb-kon
The simplest way of entering the host name is to perform a drag-and-drop operation on the
host label:
◊ Click on the label of a host icon with the middle mouse key and drag the label into the
Hostname input field by holding down the mouse key.
The buttons in the dialog window execute the following actions:
OK The entered parameter values are confirmed.
Delete The corresponding non-TA application is deleted, i.e. the icon in the appli-
cation edit window disappears.
Cancel The entered parameter values are discarded again.
b) Editing TA application parameters
Each TA application in a configuration is represented in the application edit window by an
icon. The name of the TA application is displayed within the icon. The position of an icon
within the application edit window can be changed by clicking once on the relevant icon with
the middle mouse button. The icon tracks the movement of the mouse until you once again
press the middle mouse button.
Parameter name Value Default Statement
Userfriendly-
name
User-friendly name of the non-TA
application
none APPLICATION
OsId Operating system ID of the non-TA
application
is generated
by
WinConfig
APPLICATION
LayerId Layer ID of the non-TA application is generated
by
WinConfig
APPLICATION
UserId User ID none APPLICATION
Passwd Password none APPLICATION
Remote Possible values:
remote / not remote
see page 47
Selected via a toggle button
not remote APPLICATION
Hostname Name of the host on which the non-
TA application is running
none HOST