User Manual

7 / 14
A6V101037253_en--_a Siemens
2017-02-17 Building Technologies
Examples
Set address “124”:
1. Enter addressing mode
2. Set 1-digits: Press button 4-times ⇓ LED flashes red per button press
3. Store 1-digits: press button until LED shines green – release button
4. Set 10-digits: Press button 2-times ⇓ LED flashes green per button press
5. Store 10-digits: press button until LED shines orange – release button
6. Set 100-digits: Press button 1-times ⇓ LED flashes orange per button press
7. Store address: press button until LED shines red – release button
⇓ address is stored and displayed 1x for confirmation
Set address “50”:
1. Enter addressing mode
2. Skip 1-digits: Hold button pressed until LED shines green – release button
3. Set 10-digits: Press button 5-times ⇓ LED flashes green per button press
4. Store address (skip 100-digits): hold button pressed until LED shines red
– release button
⇓ address is stored and displayed 1x for confirmation
Set address “5”:
1. Enter addressing mode
2. Set 1-digits: Press button 5-times ⇓ LED flashes green per button press
3. Store address: press button until LED shines red
⇓ address is stored and displayed 1x for confirmation