User Manual

34/44
Siem ens Actuators without spring return GEB…1 CM2Z4621en
Building Technologies 2017-05-26
8 Technical data
Operating voltage
Frequency
Safety extra-low voltage (SELV) or
Protection by extra-low voltage (PELV) as per
Requirements for external safety insulating transformer (100 % duty)
Supply line fuse
Power consumption GEB13..1: Running
GEB16..1: Running
GEB161.1E/MO: Running
Holding
AC 24 V ° 20 % (SELV) or
AC 24 V class 2 (US)
50/60 Hz
HD 384
as per EN 61 558
max. 10 A
3.5 VA / 3.5 W
5.5 VA / 5.5 W
6 VA / 5.5 W
1.5 W
Operating voltage
Frequency
Supply line fuse
Power consumption: Running
AC 230 V ° 10 %
50/60 Hz
max. 10 A
3 VA / 3 W
Nominal torque
Maximum torque (blocked)
Minimum holding torque
Nominal rotary angle (with position indication)
Maximum rotary angle (mechanic limitation)
Runtime for 90° rotary angle
Mechanical life
15 Nm
30 Nm
15 Nm
90 °
95° ± 2°
150 s
10
5
cycles
Operating voltage AC 24 V (wires 1-6) clockwise
(wires 1-7) counterclockwise
Operating voltage AC 230 V (wires 4-6) clockwise
(wires 4-7) counterclockwise
Input voltage (wires 8-2)
Current consumption
Input resistance
Max. permissible input voltage
Protected against faulty wiring
Neutral zone for non-adjustable characteristic function
for adjustable characteristic function
Hysteresis for non-adjustable characteristic function
for adjustable characteristic function
DC 0...10 V / 2...10 V
0.1 mA
> 100 kς
DC 35 V
max. AC 24 V
200 mV
2 % of ΧU
70 mV
0.7 % of ΧU
Communication
Modbus RTU RS-485, not galvanically separated
Number of nodes Max. 32
Address range 1...247 / 255
Default: 255
Transmission formats 1-8-E-1 / 1-8-O-1 / 1-8-N-1 / 1-8-N-2
Default: 1-8-E-1
Baudrates (kBaud) Auto / 9.6 / 19.2 / 38.4 / 57.6 / 76.8 /
115.2
Default: Auto
Termination 120 Ω el. Switchable
Default: Off
Adjustable with 2 potentiometers:
Offset Uo
Span ΧU
Max. input voltage
Protected against faulty wiring
DC 0...5 V
DC 2...30 V
DC 35 V
max. AC 24 V
Output signal (wires 9-2)
Output voltage U
Max. output current
Protected against faulty wiring
DC 0...10 V
DC ° 1 mA
max. AC 24 V
AC 24 V supply
(SELV/PELV)
for GEB13..1, GEB16..1..
AC 230 V power supply
for GEB33..1
Function data
Inputs
Positioning signal for GEB13..1
Positioning signal for GEB33..1
Positioning signal
for GEB16..1..
Adjustable characteristic function
for GEB163.1, 164.1
Outputs
Position indicator
for GEB16...1