User Manual

11/44
Siem ens Technische Grundlagen: Drehantriebe GEB...1 CM2Z4621en
Building Technologies 2017-05-26
This cover protects the DIL switch against dust and water spray.
The HMI of networked types consists of a push button and an LED to allow certain
interactions with the actuator or to provide visible feedback from the actuator.
2.6 Setting and operator elements
7
6
5
4
3
2
1
12
11
10
9
8
15
4621Z13
9 0 °
4
5
°
Legend
1 Housing
2 Rotary angle scale
3 DIL switch and cover
4 Potentiometer to adjust the span ΧU
5 Potentiometer to set the offset Uo
6 Mounting bracket
7 Connecting cable for power and
positioning signal
8 Connecting cable for auxiliary switches or
feedback potentiometer
9 Disengagement button for gear train
10 Setting shafts for auxiliary switches A
and B
11 Position indicator
12 Self-centering shaft adapter
13 Locking ring for shaft adapter
14 Adapter for position indicator
15 Adjustment tool for auxiliary switches
(10), potentiometer (4, 5)
For long damper shafts For short damper shafts
4621Z30
9 0 °
4
5
°
13 12
9 0 °
4
5
°
4621Z33
11
9 0 °
4
5
°
4621Z32
13
12
14
9 0 °
4
5
°
4621Z33
11
Meaning DIL switch label Meaning Function
Counter-clockwise
arrow
Clockwise arrow Rotary angle direction
Active 0 Off Self-adaptation
DC 2...10 V 2... 0... DC 0...10 V
Positioning signal
GEB161.1, GEB166.1
DC 0...35 V (Comfort) C 0 DC 0...10 V
Positioning signal
GEB163.1, GEB164.1
Factory setting for DIL switch.
Cover for DIL switch
(only for GEB16..1)
Push button and LED
at external Interface
Actuator
Arrangement of shaft
adapter
DIL switch
(Legend pos. 3)
GEB16..1
Note