User Manual

ManualsBrandsSiemens ManualsDamper actuatorsAir damper actuators Air damper actuators GDD..1E, GLD..1E

A6V11681606_en--_a Smart Infrastructure

2020-06-09

OpenAir™

Air damper actuators

GDD..1E, GLD..1E

Electronic motor driven actuators for open-close, three-position

and modulating control

● Nominal torque 5 Nm / 8 Nm

● Operating voltage AC 24 V ~ / DC 24…48 V ⎓

● Running time for 90° rotary angle 30 s

● Mechanically adjustable span between 0...90°

● Pre-wired with 0.9 m long connection cables

● Position indication: mechanical

● Self-adaption of rotational angle range and adjustable auxiliary switches for

supplementary functions

Summary of content (8 pages)

PAGE 1
s OpenAir™ Air damper actuators GDD..1E, GLD..1E Electronic motor driven actuators for open-close, three-position and modulating control ● ● ● ● ● ● ● A6V11681606_en--_a 2020-06-09 Nominal torque 5 Nm / 8 Nm Operating voltage AC 24 V ~ / DC 24…48 V ⎓ Running time for 90°rotary angle 30 s Mechanically adjustable span between 0...90° Pre-wired with 0.
PAGE 2
Use The rotary actuators are used in ventilation and air conditioning plants to regulate and shut off air dampers: ● GDD..1E for damper areas up to 0.8 m2 , GLD.1E for damper areas up to 1.2 m2 (guideline, always observe damper manufacturer’s data). ● Suitable for use with modulating controllers (DC 0/2...10 V), open-close or three-position controllers for air dampers or air throttles.
PAGE 3
Type summary Type Nominal Torque Stock no. GDD141.1E S55499-D513 GDD146.1E S55499-D514 5 Nm GDD161.1E S55499-D515 Stock no. GLD141.1E S55499-D516 GLD146.1E S55499-D517 8 Nm GLD161.1E Openclose or threeposition Modulating Nominal Torque Type Control S55499-D518 Control Openclose or threeposition Modulating Operating voltage Positioning signal Y Position indicator U = DC 0…10 V ⎓ Self-adaption of rotational angle range ‒ ‒ ‒ Aux.
PAGE 4
Notes Safety Caution National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage. ● Observe national provisions and comply with the appropriate safety regulations. ● Use only properly trained technicians for mounting, commissioning, and servicing.
PAGE 5
Technical data Power supply (G..D1…1E) GDD1..1E GLD1..1E Operating voltage (SELV/PELV) / Frequency AC 24 V ~ ± 20 % (19.2…28.8 V ~) / 50 / 60 Hz DC 24…48 V ⎓ ± 20 % (19.2…57.6 V ⎓) 1) Power consumption running G..D14..1E, G..D16..1E 1.5 W/2.8VA 1.7W/3.0VA 1.9 W/3.4VA 2.1 W/3.6VA Power consumption holding G..D14..1E, G..D16..1E 0.5 W 0.7 W 0.5 W 0.7 W Function data GDD..1E GLD..
PAGE 6
Environmental conditions Operation Climatic conditions Mounting location Temperature extended Humidity (non-condensing) IEC 60721-3-3 Class 3K5 interior, weather-protected -32…+55 °C <95 % r.h. Transport Climatic conditions Temperature extended Humidity (non-condensing) IEC 60721-3-2 Class 2K3 -32…+70 °C <95 % r.h. Storage Climatic conditions Temperature extended Humidity (non-condensing) IEC 60721-3-1 Class 1K3 -32…+50 °C <95 % r.h.
PAGE 7
Diagrams Internal Diagrams G..D16..1E (modulating, Y= DC 0/2…10 V ⎓) G..D14..1E (open-close, three-p.) AC 24 V ~ / DC 24…48 V ⎓ AC 24 V ~ / DC 24…48 V ⎓ Connection diagrams G..D1..
PAGE 8
Dimensions Dimensions in mm Revision numbers Type Valid from rev. no. Type Valid from rev. no. GDD141.1E ..D GLD141.1E ..D GDD146.1E ..D GLD146.1E ..D GDD161.1E ..D GLD161.1E ..D Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.