User Manual

3 / 8
A6V10636293_en--_b Siemens
2018-04-09 Building Technologies
Accessories
Type Description Use
ASK78.6 Centering insert, square profile
8 mm
To center a shaft with square profile 8 x 8 mm in the coupling
bushing of the actuator.
ASK78.7 Centering insert, square profile
10 mm
To center a shaft with square profile 10 x 10 mm in the
coupling bushing of the actuator.
ASK78.9 Centering insert, round 10 mm To center a shaft with round dia. 10 mm in the coupling
bushing of the actuator.
ASK78.10 Centering insert, round 12 mm To center a shaft with dia. 12 mm in the coupling bushing of
the actuator.
Product documentation
Topic Title Document ID
Data sheet Air damper actuators for railway vehicles A6V10636293_en--_a
Technical basics Rotary damper actuators without spring return GD..E A6V10636139_en--_a
Mounting instructions GD..1E/RW, GD..1G/RW, GL..1E/RW A6V10636275_----_a
Related documents such as environmental declarations, CE declarations, etc., can be down-
loaded at the following Internet address:
http://siemens.com/bt/download
Notes
Safety
Caution
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
● Use only properly trained technicians for mounting, commissioning, and servicing.
Installation
WARNING
No internal line protection for supply lines to external consumers
Risk of fire and injury due to short-circuits
● Adapt the line diameters as per local regulations to the rated value of the installed fuse.
Maintenance
The actuators GD..161.1E/RW are maintenance-free.