Basic Documentation

5/46
Siemens VAV compact controller KNX/PL-Link G..B181.1E/KN CE1P3547en
Smart Infrastructure 2021-10-25
1.2.4 Document use / request to the reader
Before using our products, it is important that you read the documents supplied
with or ordered at the same time as the products (equipment, applications, tools
etc.) carefully and in full.
We assume that persons using our products and documents are authorized and
trained appropriately and have the technical knowledge required to use our
products as intended.
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the
improper compliance of the same.
1.3 Objectives of this basic documentation
This basic documentation covers the networked VAV compact controllers
GDB181.1E/KN and GLB181.1E/KN. These devices are designed for controlling
variable or constant air volume flows.
This document is structured along the according workflow. Following a description
of the devices and their application, mounting, engineering, and commissioning are
covered. A references section lists technical data, parameters, and data points.
1.4 References
[1] G..B181.1E/KN – Datasheet for VAV compact controller (N3547)
[2] G..B181.1E/KN – Mounting instruction for VAV compact controller (M3547)
[3] AST20 – VAV handheld tool (A6V10631836)
[4] AST22 – Interface converter (A6V11236956)
[5] ACS931 – PC-Software for OEM (N5853)
[6] ACS941 – PC-Software for Service (N5854)
[7] ETS KNX Engineering Software – Download (https://www.knx.org)
[8] ACS790 – Synco Engineering Tool – Download (Login required)
(https://support.industry.siemens.com/cs/document/109481853)
[9] Synco KNX S-Mode datapoints (Y3110)