Data Sheet for Product

4 / 12
Siemens A6V10881141_en--_c
Smart Infrastructure 2019-04-25
Push-button addressing
Display current address (digits in reverse order)
The Modbus address can be set without a separate tool by using the push-button and LED.
To display the current address, press button <1s.
Colors
1-digits: red 10-digits: green 100-digits: orange
Example for address 124:
LED
Note The address is entered and shown in reverse order.
Set new address (digits in reverse order)
1. Enter addressing mode: press button > 1s until LED shines red, then release button
(before LED gets dark).
2. Enter digits: press button n-times à LED flashes per button press (feedback).
Colors: 1-digits: red / 10-digits: green / 100-digits: orange
3. Store digits: press button until LED shines in color of following digits – release button,
4. Save address: press button until LED shines red (confirmation) à release button.
An address can be stored at any time, i.e. after setting the 1-digits, or after setting the 1-
and the 10-digits.
5. Entered address is repeated one times for confirmation.
Note: If button is released before LED shines red, the address is discarded.
Examples
Set address “124”:
1. Enter addressing mode
2. Set 1-digits: Press button 4-times à LED flashes red per button press
3. Store 1-digits: press button until LED shines green – release button
4. Set 10-digits: Press button 2-times à LED flashes green per button press
5. Store 10-digits: press button until LED shines orange – release button
6. Set 100-digits: Press button 1-times à LED flashes orange per button press
7. Store address: press button until LED shines red – release button
à address is stored and displayed 1x for confirmation
Set address “50”:
1. Enter addressing mode
2. Skip 1-digits: Hold button pressed until LED shines green – release button
3. Set 10-digits: Press button 5-times à LED flashes green per button press
4. Store address (skip 100-digits): hold button pressed until LED shines red
– release button
à address is stored and displayed 1x for confirmation
Set address “5”:
1. Enter addressing mode
2. Set 1-digits: Press button 5-times à LED flashes green per button press
3. Store address: press button until LED shines red
à address is stored and displayed 1x for confirmation