User Manual

ManualsBrandsSiemens ManualsDamper actuatorsAir damper actuators GDA..1E, GLA..1E

A6V11997021_en--_a Smart Infrastructure

2020-06-09

OpenAir™

Air damper actuators

GDA..1E, GLA..1E

Electronic motor driven actuators for open-close, three-position

and modulating control

● Nominal torque 5 Nm / 10 Nm

● Operating voltage AC 24 V ~ / DC 24…48 V ⎓

● Running time for 90° rotary angle 90 s

● Mechanically adjustable span between 0...90°

● Pre-wired with 0.9 m long connection cables

● Position indication: mechanical

● Self-adaption of rotational angle range and adjustable auxiliary switches for

supplementary functions

Summary of content (8 pages)

PAGE 1
s OpenAir™ Air damper actuators GDA..1E, GLA..1E Electronic motor driven actuators for open-close, three-position and modulating control ● ● ● ● ● ● ● A6V11997021_en--_a 2020-06-09 Nominal torque 5 Nm / 10 Nm Operating voltage AC 24 V ~ / DC 24…48 V ⎓ Running time for 90°rotary angle 90 s Mechanically adjustable span between 0...90° Pre-wired with 0.
PAGE 2
Use The rotary actuators are used in ventilation and air conditioning plants to regulate and shut off air dampers: ● GDA..1E for damper areas up to 0.8 m2 , GLA.1E for damper areas up to 1.5 m2 (guideline, always observe damper manufacturer’s data). ● Suitable for use with modulating controllers (DC 0/2...10 V), open-close or three-position controllers for air dampers or air throttles.
PAGE 3
Type summary Nominal Torque Type Stock no. GDA141.1E S55499-D612 GDA146.1E S55499-D638 5 Nm GDA161.1E Nominal Torque Stock no. GLA141.1E S55499-D614 S55499-D615 10 Nm GLA161.1E Operating voltage Openclose or threeposition S55499-D613 Type GLA146.1E Control S55499-D616 DC 24…48 V ⎓ Self-adaption of rotational angle range ‒ ‒ ‒ Aux.
PAGE 4
Installation WARNING No internal line protection for supply lines to external consumers Risk of fire and injury due to short-circuits ● Adapt the line diameters as per local regulations to the rated value of the installed fuse. Maintenance The actuators G..D..1E are maintenance-free. Disposal The device is considered electrical and electronic equipment for disposal in terms of the applicable European Directive and may not be disposed of as domestic garbage.
PAGE 5
Technical data Power supply (G..A1…1E) GDA1..1E GLA1..1E Operating voltage (SELV/PELV) / Frequency AC 24 V ~ ± 20 % (19.2…28.8 V ~) / 50 / 60 Hz DC 24…48 V ⎓ ± 20 % (19.2…57.6 V ⎓) 1) Power consumption running G..A14..1E, G..A16..1E 1.0 W / 2.0 VA 1.2 W / 2.2 VA 1.4 W / 2.5 VA 1.6 W / 2.7 VA Power consumption holding G..A14..1E, G..A16..1E 0.5 W 0.7 W 0.5 W 0.7 W Function data GDA..1E GLA..
PAGE 6
Environmental conditions Operation Climatic conditions Mounting location Temperature extended Humidity (non-condensing) IEC 60721-3-3 Class 3K5 interior, weather-protected - 32…+ 55°C < 95 % r.h. Transport Climatic conditions Temperature extended Humidity (non-condensing) IEC 60721-3-2 Class 2K3 - 32…+ 70°C < 95 % r.h. Storage Climatic conditions Temperature extended Humidity (non-condensing) IEC 60721-3-1 Class 1K3 - 32…+ 50°C < 95 % r.h.
PAGE 7
Diagrams Internal Diagrams G..A14..1E (open-close, three-p.) AC 24 V ~ / DC 24…48 V ⎓ G..A16..1E (modulating, Y= DC 0/2…10 V ⎓) AC 24 V ~ / DC 24…48 V ⎓ Connection diagrams G..A1..
PAGE 8
Cable labeling Connection Code No Color Abbreviation Meaning Actuators AC 24 V ~ DC 24…48 V ⎓ G G0 Y1 Y2 1 2 6 7 red black purple orange RD BK VT OG Y U 8 9 grey pink GY PK System potential AC 24 V ~ / DC 24…48 V ⎓ System neutral Positioning signal AC/DC 0 V, “clockwise” (G..A14..1E) Positioning signal AC/DC 0 V, “counter-clockwise” (G..A14..1E) Signal in (G..A16..1E) Signal out (G..A16..