Basic Documentation

41/44
Siemens Rotary actuators with spring return GCA…1 CE1Z4613en
Building Technologies Environmental compatibility and disposal 2017-05-26
K3
K2
K1
Operating state
Direction of rotary
4613T02en
Fully closed
Fully open *)
Control operation
Switch
contacts
Mounting position for
actuators GCA16..1
*) Actuators with adjustable characteristic function: Full opening cannot be reached
(depending on Uo, ΧU) in this position (switch contact K2).
9.5 Connection diagrams (networked)
9.5.1 Typical application
The application controller is connected to the actuator by the bus cable.
10 Environmental compatibility and
disposal
These actuators were developed and manufactured by using environmentally-
compatible materials and by complying with our environmental standards.
For disposal, please remember the following at the end of product life or on defects:
∂ The device consists of
materials such as steel, die-cast aluminum and die-cast zinc
Do not dispose of as household garbage. This applies particularly to the circuit
board.
See also European Directive 2012/19/EU
∂ As a rule, dispose of all waste in an environmentally compatible manner and in
accordance with environmental, recycling, and disposal techniques. Ad-here to all
local and applicable laws.
∂ The aim is to achieve maximum recyclability at the lowest possible pollution. To do
this, note the various material and disposal notes printed on specific parts.
Spring return actuators contain pretensioned springs. Only trained personnel may open
(by means of special tools) and dispose of such actuators.
The environmental declarations for these actuators contain detailed information on the
materials and volumes used. Request a declaration at your local Siemens sales office.
Operating states of
GCA16..1
Note
GCA163.1, GCA164.1
GCA161.1E/MO
General notes
Product-specific note
Environmental declaration