User Manual

ManualsBrandsSiemens ManualsDamper actuatorsCE Declaration GAP...

CE1N4608en

2019-09-27

Smart Infrastructure

608

OpenAir

Fast running actuators for

air dampers

GAP19..

Fast runner rotary version, AC/DC 24 V

Electronic actuator for 2-position, 3-position, or modulating control, nominal

torque 6 Nm, at 2 s running time, self-centering shaft adapter, range mechanically

adjustable between 0...90°, prewired with 0.9 m long standard connection cables.

GAP196.1E with adjustable auxiliary switches for auxiliary functions.

Use

· For damper areas up to ca. 1 m

, friction dependent.

· For laboratory fume hoods, etc.

· Suitable for use with continuous, 2-position, or 3-position controllers.

Summary of content (6 pages)

PAGE 1
4 608 OpenAirTM Fast running actuators for air dampers GAP19.. Fast runner rotary version, AC/DC 24 V Electronic actuator for 2-position, 3-position, or modulating control, nominal torque 6 Nm, at 2 s running time, self-centering shaft adapter, range mechanically adjustable between 0...90°, prewired with 0.9 m long standard connection cables. GAP196.1E with adjustable auxiliary switches for auxiliary functions. Use · For damper areas up to ca. 1 m2, friction dependent.
PAGE 2
Type summary Types Power GAP191.1E Auxiliary switch Damper size Runtime 6 Nm Ca. 1 m2 2s No AC/DC 24 V GAP196.1E Torque Yes Note When installing and operating rotary actuators type GxP191.1E and GxP196.1E in lownoise environments, check the acoustic response of the actuators operated together with the measuring and control equipment.
PAGE 3
Functions DIL switch setting Siemens default setting A DIL switch is used to set the actuator's functionality. Continuous control 2-position control 3-position control Position indication: Mechanical Rotary angle position. Position indication: Electric. Output voltage U = DC 0...10 V is generated proportional to rotary angle. U depends on the DIL switch's rotary direction position. Rotary angle limitation The rotary angle of the shaft adapter can be limited mechanically to 5° increments. GAP196.
PAGE 4
Technical data 24 VAC/VDC supply (SELV/PELV) Functional data Positioning signal Y/Y1 Positioning signal Y2 Position indicator Auxiliary switch for GAP196 Connection cable Housing type Protection class Environmental conditions Norms and Directives Dimensions Weight Operating voltage / Frequency Power consumption: Actuator running Hold Nominal torque Maximum torque (when blocked) Nominal rotary angle / max.
PAGE 5
Connection diagrams Internal diagrams 2-position control 3-position control Modulating control Connection diagrams 2-position control Single pole single throw (SPST) 5/6 Siemens Smart Infrastructure Air damper actuators for laboratory applications GAP19… CE1N4608en 2019-09-27
PAGE 6
Cable designations Pin Cable Meaning Code No. Color Abbr. Actuators G 1 red RD 24 VAC/VDC G0 2 black BK System ground Y2 7 orange OG Pos. signal AC/DC 0 V, AC/DC 24 V "close" Y/Y1 8 gray GY Pos.