Data Sheet for Product

ManualsBrandsSiemens ManualsDamper actuatorsCE Declaration GAP...

OpenAir™

Fast running actuators for air dampers

GAP19..

Fast runner rotary version, AC/DC 24 V

● Electromotoric actuator for 2-position, 3-position, or modulating control

● Nominal torque 6 Nm at 2 s running time

● Self-centering shaft adapter

● Range mechanically adjustable between 0…90°

● Prewired with 0.9 m long standard connection cables

● GAP196.1E with adjustable auxiliary switches for auxiliary functions

CE1N4608en Smart Infrastructure

2021-11-30

Summary of content (9 pages)

PAGE 1
OpenAir™ Fast running actuators for air dampers GAP19.. Fast runner rotary version, AC/DC 24 V ● ● ● ● ● ● CE1N4608en 2021-11-30 Electromotoric actuator for 2-position, 3-position, or modulating control Nominal torque 6 Nm at 2 s running time Self-centering shaft adapter Range mechanically adjustable between 0…90° Prewired with 0.9 m long standard connection cables GAP196.
PAGE 2
Use ● ● ● For damper areas up to ca. 1 m2, friction dependent For laboratory fume hoods, etc. Suitable for use with continuous, 2-position, or 3-position controllers Functions DIL switch setting A DIL switch is used to set the actuator's functionality. Modulating control 2-position control 3-position control 2-Pt 3-Pt Factory setting DC 0…10 V DC 2…10 V 0…20 mA 4…20 mA Position indication Mechanical Rotary angle position Electrical Output voltage U = DC 0...
PAGE 3
The GAP19..1E actuator has a reduced holding torque when no electrical power is applied. For applications requiring a holding torque, the actuator must not be decoupled from the power supply. Alternative: GAP191.1E/IHT / S55499-D369 GAP191.1E/IHT guarantees a holding torque of min. 6 Nm even in currentless state. Factory setting The actuator is preset at the factory to: ● ● 0...
PAGE 4
Notes Safety CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage. ● Observe national provisions and comply with the appropriate safety regulations. Disposal The device is considered an electronics device for disposal in terms of European Directive 2012/19/EU and may not be disposed of as domestic garbage. ● Dispose of the device through channels provided for this purpose.
PAGE 5
Technical data Power Operating voltage (SELV/PELV) AC/DC 24 V ± 20 % Frequency 50 Hz / 60 Hz Power consumption Running 30 VA / 22 W Holding 5W Nominal torque 6 Nm Maximum torque (when blocked) 18 Nm Nominal rotary angle 90° Maximum rotary angle 95° ± 2° Functional data Torque Rotary angle Runtime for 90° rotary angle 2s Sound power level 45 dB(A) Inputs Positioning signal Y/Y1 Input voltage Y/Y1+ DC 0 (2)...10 V / 0 (4)...
PAGE 6
Auxiliary switch (GAP196.1E) Contact loading 6 A resistive, 2 A inductive Voltage (no mixed operation AC 24 V / AC 230 V) AC 24...230 V Switching range for auxiliary switches 5°…90° Setting increments 5° Connection cable Cable length 0.9 m Cross-sectional area 0.
PAGE 7
Dimensions 81 x 192 x 63 mm (see Dimensions [▶ 10]) Actuator B x H x T Damper shaft Weight 1) Round 6.4...20.5 mm square 6.4...13 mm Minimum shaft length 20 mm Excluding packaging 1.260 kg The documents can be downloaded at http://siemens.com/bt/download.
PAGE 8
3-position control Connection diagrams 2-position control Single pole single throw (SPST) Cable designations Pin Actuators AC/DC 24 V Cable Meaning Code No. Color Abbreviation G 1 Red RD System potential AC/DC 24 V G0 2 Black BK System neutral Y2 7 Orange OG Positioning signal AC/DC 0 V, AC/DC 24 V "close" Y/Y1 8 Gray GY Positioning signal DC 0 (2)...10 V 0 (4)...
PAGE 9
Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies Document ID CE1N4608en Edition 2021-11-30 © Siemens Switzerland Ltd, 2009 Technical specifications and availability subject to change without notice.