User Manual

2-8
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Output devices
Overview and selection guides
Binary output devices
Binary output devices
Type N 567/01 N 567/12 N 567/11 N 567/22 N 510/03 N 510/04 N 512 N 511/02 N 502/02 UP 510/03 UP 510/13 UP 562/31 UP 511/10 RS 510/23 JB 510C23 RL 512/23 JB 512C23 RL 513D23 JB 513C23
Enclosure data
Design N N N N N N N N N UP UP UP UP RS JB RL JB RL JB
Modular installation devices for
mounting on TH35 EN 60715
mounting rail
n n n n n n n n n
For installation in flush-mounting
switch and socket boxes with Ø
60 mm
n n n n
Modular installation device for
mounting in AP 118 automation
module box or AP 641 room
control box
1)
n n n
Modular installation device for
mounting in Junction Box 4" x 4“
n n n
10-pole BTI socket (BTI - Bus
Transceiver Interface) for plugging
of bus terminal devices with BTI
connector
n
Dimensions
• Width/Ø [mm]
(1 MW = 18 mm)
4
MW
4
MW
4
MW
8
MW
4
MW
4
MW
8
MW
8
MW
8
MW
71 50 Ø 53 Ø 53 50.2 70 47,8 70 47,8 70
• Height [mm] 71 50.9 28 28 48.8 90 86,5 90 86,5 90
• Depth [mm] 42 41.3 35.5 44.6 36,2 44.6 36,2 44.6
Mounting type
Screw fixing n
Display/control elements
Direct operation (local operation) n n n n n n
Mechanical local operation n n n
Mechanical switching position
indication
n n n
LED for status indication per
output
n n n n n n
LED for indicating direct operation n n n n n n
Power supply
Bus-powered electronics n n n n n n n n n n n n n
Electronics powered via an integ-
rated power supply unit for supply
voltage 230 V AC
n n n n n n
Bus connection
Integrated bus coupling units n n n n n n n n n n n n n n n n n n n
Bus connection via bus terminal n n n n n n n n n n n n n n n n n n n
Bus connection via contact system
to data rail
n n n n n n n n n
Outputs
Load output
Floating relay contacts 4
2)
8
2)
8
2)
16
2)
4 4 8 8 8
2)
2 2 2 1 2 2 1 1 3 3
Rated contact voltage, AC [V] 230 230 230 230 230 230 230
3)
230 230 230 230 230 230 230 277 230 347 230 277
Rated contact current [A] 8 2 8 10 16 16 16 16 16 10 10 6 16 10 10 16 20 20 10
Inputs
Max. cable length, unshielded,
twisted [m]
100 5 5
Pushbutton inputs
For signal input (floating contacts) 8 2 2
Determination of switching state
by means of the voltage generated
in the device
n n
For voltage input 12...230 V AC/DC 8
1)
The AP 641 room control box and AP 118 automation module box must be ordered separately, see Chapter Quick-assembly system - Room control box -
Module boxes
2)
Except channel A
3)
Also available as cUL version: AC 120 V / AC 277V / AC 347 V, 20 A, Order No.: 5WG1512-1CB01
22
06_VS_2017_Gamma HQ_EN_Chapter_2_V1.indd 8 23.07.2018 14:08:09