User Manual

2-7
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Output devices
Technical specications
Binary output devices
...Continuation of the table
Switching actuators Modular switching actuators
Main modules Expansions
Type
N 530D31 N 530D51 N 530D61 N 532D31 N 532D51 N 532D61 N 534D31 N 534D51 N534D61 N 562/11 N 512/11 N 513/11 N 562/21 N 512/21 N 513/21
Application program
1)
9A0101 9A0201 9A0301 9A0101 9A0201 9A0301 9A0101 9A0201 9A0301 982002
2)
Output functions
Max. number of group addresses 2000 2000 2000 2000 2000 2000 2000 2000 2000 511 511 511
Max. number of assignments 2000 2000 2000 2000 2000 2000 2000 2000 2000 511 511 511
Max. number of expansion modules that can
be butt-mounted
4 4 4
Blocking function n n n n n n n n n
Configurable behavior in the event of a bus
voltage failure
n n n n n n n n n n n n n n n
Configurable behavior in the event of a bus
voltage recovery
n n n n n n n n n n n n n n n
Behavior in the event of mains voltage failure
• Positive OFF switching of the outputs
• Unchanged switching state of outputs n n n n n n n n n n n n n n n
Heating control
Controlling electrothermal actuators n n n n n n
Scene control
Integrated 8-bit scene control n n n n n n n n n n n n n n n
Scenes to be integrated per channel 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Time functions
OFF delay n n n n n n n n n n n n n n n
ON delay n n n n n n n n n n n n n n n
Timer mode (automatic stairwell switch) n n n n n n n n n n n n n n n
Night mode (lighting for cleaning) n n n n n n n n n n n n n n n
Warning of impending OFF n n n n n n n n n n n n n n n
Logical functions
Positively driven operation n n n n n n n n n n n n n n n
Logic function (1 object) n n n n n n n n n
Logic function (2 objects) n n n n n n n n n n n n n n n
Can be inverted per output
(NO contact/NC contact)
n n n n n n n n n n n n n n n
Status
Transmitting status per channel n n n n n n n n n n n n n n n
Operating hours counter with limit
monitoring per channel
n n n n n n n n n n n n n n n
Switching cycle counter with limit
monitoring per channel
n n n n n n n n n n n n n n n
Load current recording / monitoring per
channel
n n n n n n
1)
For current application programs, see www.siemens.com/gamma-td.
2)
Via main module
22
06_VS_2017_Gamma HQ_EN_Chapter_2_V1.indd 7 23.07.2018 14:08:09