User Manual

Display and operation units
IR-System
IR receiver decoder
1-31
1
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
Stock No. Product No. DT
5WG1450-7AB03 S 450/03 A
S 450/03IR receiver decoder
• For receiving IR signals transmitted from IR hand-held transmitters
• Conversion of IR signals received from up to 32 IR channels into bus telegrams
• Congurable evaluation of the IR signals per IR channel as single button or as button pair
• Per IR button selectable functions
- Switching on/off/over
- Switching on or off at either rising or falling edge
- Single button dimming
- Single button sun protection control
- 1-/8-bit scene control
- 8-/16-bit value
- Percentage value
- Temperature value
- Brightness value
- Positively driven operation
• Depending on the selected main function
- Per IR button selectable additional function executed either after a time delay (time delay congurable
from 100 ms to 6550 s) or alternatively on a long button press
• Per IR button pair selectable functions
- 2-button dimming with stop telegram
- 2-button sun protection control
- Transmission variable percentage value
- Transmission variable 8-bit value
- 1-/8-bit scene control
- Positively driven operation
• Depending on the selected main function: per IR button selectable additional functions
- Switching on/off
- 8-16-bit value
- Percentage value
- Temperature value
- Brightness value
- Recall/save 1-bit scene 1
- Recall/save 1-bit scene 2
- Recall 8-bit scene
- Positively driven on/off/deactivate
• Blocking can selected for each IR button and congured individually
• Integrated bus coupling units, Bus connection via bus terminal
• Bus-powered electronics
• Including clamping spring and rosette for installation in ceilings, walls or lights
• For commissioning when mounted, a magnet is required
Dimensions (W x H x D) 25 x 26 x 75 mm
17-Pushbuttons bus transceiver module (BTM).indd 31 19.08.2018 14:52:34