User Manual

16-3
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Appendix
Ordering information
General ordering information
Unless stated otherwise in the „Selection and ordering data“ of this catalog, our products are supplied individually packed. It is essential that
whole number multiples of these quantities be ordered to ensure satisfactory quality of the products and problem-free order processing.
The products are delivered in a neutral carton. The label includes warning notices, the CE marking, and device descriptions in English and Ger-
man. In addition to the Article No. (MLFB) and the number of items in the packaging, the operating instructions order number (Instr.-Order-No.)
is also specified. Most device Article No.‘s can be obtained by means of the EAN barcode to simplify ordering and storage logistics. The associated
master data is available from your local Siemens representative, too.
Ordering very small quantities
When very small quantities are ordered, the cost of order processing often exceeds the order value. We therefore recommend that you combine
several small orders. Where this is not possible, we regret that we are obliged to make a small processing charge: for orders with a net goods
value of less than € 200 we charge a € 25 supplement to cover our order processing and invoicing costs.
Explanations on the selection and ordering data
Delivery time class (DT=LK)
The delivery time class (DT) lines out the delivery time starting from the shipping point from Siemens AG (products ready for
dispatch). If ordered in normal quantities, the products are usually delivered within the specified delivery times, calculated
from the date we receive your order. In exceptional cases, delivery times may vary from those specified. The delivery times are
valid ex works from Siemens AG (products ready for dispatch). The goods shipping time depends on the destination and the
method of shipping.
In this catalog, the following delivery time classes are mentioned:
A = 1 – 2 days
B = 3 – 7 days
C = 8 – 21 days
D = 22 – 30 days
X = more than 30 days
Price
The price refers to the price unit (PU).
Price unit (PU)
The price unit defines the number of units, sets or meters to which the specified price and weight apply.
Price group (PG)
Each product is allocated to a price group.
Weight
The defined weight is the net weight in kg and refers to the price unit (PU).
Example
DT Article-No. Price per PU PU PG
A 5WG1125-1AB02 1 ST A21
DT: Delivery time class A = two workdays
Price: Price per Price Unit (PU)
PU: One unit (on which price is based)
PG: Price group A21
16 16
39_VS_2017_Gamma HQ_EN_Annexe_V2.indd 3 30.07.2018 09:19:23