User Manual

14-24

Home automation system

Synco™ living

Door/window contact AP 260

Siemens Switzerland Ltd

Building Technologies Division

2019www.siemens.com/gamma

Stock No. Product No. DT

5WG3260-3AB11 AP 260/11 A

AP 260/11 Door/window contact with battery, titanium white

• For detecting the state (closed/open) of a door or window via the reed contact integrated in the

device, with actuation of the reed contact through the supplied magnet for attachment to the moving

part of the door or window

• Connection for an external oating contact

• 4 plug-in terminals for wire cross-sections (solid or nely stranded) of 0.14...0.5 mm2 for connection

of the external contact and to allow setting via a wire jumper, whether monitoring is to cover internal

contact only, external contact only, or both contacts

• KNX-RF transmitter for 868.3 MHz

• Electronics powered by a lithium battery (1/2 AA 3.6 V), with a battery service life of approx. 5 years,

with signaling of battery status every 24 hours, and with an LED that ashes every 10 seconds to

indicate that the battery needs replacing

• Commissioning using a pushbutton located on the front of the sensor – no additional aids required

• Surface mounting

• Comprising one mounting plate for screw or adhesive fastening, clip-on radio sensor with integrated

reed contact and trigger solenoid. Battery included in delivery.

Dimensions (W x H x D) 87 x 36 x 27 mm

11-Central apartment unit QAX9__.indd 24 26.07.2018 15:21:47