User Manual
12-5
Control and automation devices
Logic and control functions
IP control devices
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
12
Stock No. Product No. DT
5WG1152-1AB01 N 152/01 A
N 152/01IP Control Center
Visualisation controller for full-graphic visualizations on web-compatible end devices such as PCs, tablets
and smart phones with a standard web browser.
For communication between KNX devices and PCs and, in connection with a LAN-/WLAN modem or DSL
router, for remote access to a KNX installation, for usage as an interface for the ETS 3/4/5 and as an inter-
face for a visualization, with usage of the KNXnet/IP protocol, with the following simultaneously usable
functions:
• Web server for operating and monitoring up to 1250 statuses and values transmitted by the KNX
network, which can be displayed using a standard browser on PCs, tablets, or smartphones connected
to the IP network
• Special web page for rmware upgrade
• Graphical web editor for a creation of fully graphical visualization with control and display elements,
congurable in various styles
• Smart editor for the creation of a visualisation, tuned for mobile browsers, smartphones, tablets with
control and display elements, congurable in various styles and layouts
• Annual timer, with astronomical calendar, for 300 time switch schedules with up to 30 time switch
commands per time switch schedule
• Scene module with up to 5000 scenes or events
• Chart module for recording and reporting of up to 10 data points
• Monitoring module for monitoring and storage of up to 1000 events into a ring buffer
• IP interface for control of up to 20 IP-devices via up to 20 TCP/UDP commands per IP-device
• Fully graphical logic module with up to 1000 logic functions
• Alarm function for up to 250 different alarms
• E-mail function, with up to 20 contacts, for transmission of chart data from chart module, logged data
from monitoring module or alarm data
• Ethernet interface 10/100 Mbits/s with RJ45 socket for connection to the IP network using the Internet
Protocol
• 2 LED displays for IP connection/communication and for error messages
• Integrated bus connector and bus terminal for connection to a KNX network
• Power supply of the electronics by an external voltage source for DC 24 V, 50 mA
• Series installation device for mounting on support rails TH35 DIN EN 60715
Dimension width (1 MW = 18 mm) 4 MW
Accessories for N 152/01
Product Title Stock No. Product No. DT
Electronic power supply unit, 350 mA 4AC2402 4AC2402 B
LOGO! Power 24 V/1.3 A 6EP3331-6SB00-0AY0 LOGO!POWER 24 V/1,3 A A
5-IP control devices.indd 5 26.07.2018 15:15:56