User Manual

11-20
Physical sensors
without KNX connection
Temperature
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
11
Range overview QAA20..1
Analog output,
signal
Operating
voltage
[V]
Display Stock No. Product No. DT
DC 0...10 V AC 24
DC 13.5...35
BPZ:QAA2061 QAA2061 A
DC 0...10 V AC 24
DC 13.5...35
LCD BPZ:QAA2061D QAA2061D A
DC 4...20 mA DC 13.5...35 BPZ:QAA2071 QAA2071 A
Room temperature sensor, active
Data sheet N1749
Measuring range, temperature 0...50 °C
Time constant 7 min
Measurement accuracy at AC 24 V in the range of
-25 °C...+25 °C ± 0.75 K
-50 °C...+50 °C ±0.9 K
Connection, electrical Screw terminals
Degree of protection IP30
Dimensions (W x H x D) 90 x 100 x 36 mm
QAA20..1
Stock No. Product No. DT
BPZ:QAA2012 QAA2012 A
Variants QAA..N = no logo
QAA2012 Room temperature sensor Pt1000
• Passive sensors for acquiring the temperature in rooms.
Data sheet N1745
Sensing element, temperature Pt1000
Time constant 7 min
Measurement accuracy At 0...50 °C: ±0.6 K
Data sheet N1745
Stock No. Product No. DT
BPZ:QAC2012 QAC2012 A
Connectable with temperature sensor N 258/02 (5WG1258-1AB02), see chapter Physical Sensors - with KNX connection.
QAC2012 Outside sensor Pt1000
• For acquiring the outside temperature and – to a lesser degree – solar radiation, the effect of wind
and the temperature of the wall.
Data sheet N1811
Measuring range, temperature -50...70 °C
Sensing element, temperature Pt1000
Measurement accuracy At 0 °C: ±0.3 K
Time constant 14 min
5-Motion_presence.indd 20 26.07.2018 15:11:24