User Manual

11-7
Physical sensors
with KNX connection
Motion/presence
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
11
Stock No. Product No. DT
5WG1258-7EB01 AP 258E10 A
AP 258E10Surface-mounting enclosures
• For xing the presence detectors UP 258D12 and UP 258E22 and the brightness sensor UP 255D21 as
a surface mounting device
Dimension (Ø x H) 88 x 44 mm
Range overview AP 251..
Product Title Stock No. Product No. DT
Motion detector IP55, titanium white 5WG1251-3AB11 AP 251/11 A
Motion detector IP55, anthracite 5WG1251-3AB21 AP 251/21 A
Motion detector
• To detect and report motion, optionally with or without a brightness threshold taken into considerati-
on
• Sensing angle 290°, including masking to limit the capture zone, range up to 16 m (radius) with
mounting height 2...4 m and at 22 °C
• Integrated infrared receiver to set brightness threshold and delay time, as well as operating mode
(test mode, standard mode, pulse mode) via an infrared remote control
• Blocking and release of reporting mode through a communication object
• Bus-powered electronics
• Integrated bus coupling units, Bus connection via bus terminal
• Device for wall or ceiling mounting
• Degree of protection IP 55 zur Montage auch im Außenbereich
Dimensions (W x H x D) 180 x 86 x 74 mm
AP 251..
Phase out
5-Motion_presence.indd 7 26.07.2018 15:11:20