User Manual

11-2
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Physical sensors
Technical specication
Physical sensors with KNX connection
Room sensors for flush mounting
The Symaro sensor front module is equipped with spring clips. The spring clips ensure easy and error-free mounting of the front module to the
basic module. In addition, an anti-theft device prevent unauthorized removal of the front module.
B
C
D
A
I201_18588
A: Basic module AQR257../AQR254...
B: DELTA frame see chapter Display and operation units - Pushbutton accessories
C: Anti-theft device
D: Front module AQR253..
Overview of module combinations – Room sensors
Communicating sensors Mounting
1)
Measuring Variables Display Input
Basic
module
+ Front module CO2
Relative
humidity
Temperature CO2-indicator
passive
Temperature
NTC 10k
Two
potential-free
contacts
AQR2570Nx
+
AQR2532NNW UP n n n
AQR2570Nx
+
AQR2535NNW UP n n n n
AQR2576Nx + AQR2530NNW UP n n n
AQR2576Nx + AQR2532NNW UP n n n n
AQR2576Nx + AQR2535NNW UP n n n n n
AQR2576Nx + AQR2535NNWQ UP n n n (radial) n n n
QMX3.P30 AP n
QMX3.P40 AP n n
QMX3.P70 AP n n n n
Replace x with:
– F for VDE/CEE (70x70 mm)
– H for British Standard (83x83 mm)
– G for Italian Standard 3 modular (110x64 mm)
– J for UL Standard 2” x 4” (64x110 mm)
1)
AP surface mounted, UP flush mounted
Detection range
A
B
C
D
M
The maximum detection ranges to be achieved are as follows divided:
A
Sitting person
B
Walking person str
aight
C
Walking person crosswise (tangential)
D
Brightness measurement
M
Mounting height from floor level
Maximum achievable detection ranges
for UP 258E22 / UP 258D12 (in meters)
M A B C D
5,0 – Ø 8,5 Ø 14 Ø 3,0
4,0 – Ø 7,5 Ø 12 Ø 2,3
3,5 Ø 5,5 Ø 6,5 Ø 10 Ø 2,0
3,0 Ø 5,0 Ø 6,0 Ø 8 Ø 1,6
2,5 Ø 4,5 Ø 5,0 Ø 7 Ø 1,2
1111
26_VS_2017_Gamma HQ_EN_Chapter_11_V1.indd 2 26.07.2018 15:11:49