User Manual

10-17
Gateways, interface converters
KNX/USB
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
10
Stock No. Product No. DT
5WG1148-1AB12 N 148/12 A
N 148/12USB Interface
• Compatible with USB 2.0 and USB 3.0
• For isolated access to the bus line over the built-in USB socket (type B)
• For connection of a PC for addressing, parameterization, visualization, logging and diagnosis of bus
devices
• Access to all bus devices in the whole bus system
• Support of bus telegrams with up to 64 bytes length
• Power supply over the bus line and over USB through the connected PC
• Integrated bus coupling unit, bus connection over contact system to data rail and parallel over bus
terminal
• Transmission at USB 2.0 speed (max. 12 Mbit/s) between PC and USB interface
• Modular installation device for mounting on TH35 DIN EN 60715 mounting rail
Dimension width (1 MW = 18 mm) 1 MW
Stock No. Product No. DT
S55800-Y101 OCI702 A
OCI702USB - KNX Service interface
The service interface consists of:
• OCI702 service interface
• USB 2.0 cable (Type A / B)
• KNX service cable for Synco™ controllers (RJ45 / RJ45)
• KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
• KNX service cable (RJ45 / KNX bus terminal)
With the respective PC software, the interfaces allows to commission and service devices with KNX
communication, e.g. from the following ranges:
• Synco™ 700 controllers and room devices
• KNX room thermostats RDF..., RDG..., RDU341
• Individual room controllers RXB..
• Synco™ living central apartment units QAX9...
• Desigo TRA
• GAMMA devices
Data sheet A6V10438951
9-KNX_Ethernet.indd 17 26.07.2018 14:36:51