User Manual

10-6
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Gateways, interface converters
Technical specication
KNX/DALI
... Continuation of the table
Type N 141/21 N 141/03 N 141/31 N 525E
Application program
1) 9834xx1)
9837xx
1)
9833xx
1)
983Dxx 980801
Name Twin plus plus Twin Twin
Time functions
Timer mode, 1-step (automatic stairwell switch) n n n n n
Timer mode, 2-step n n n n n
Night mode (lighting for cleaning) n n n n n
Warning of impending OFF n n n n n
Dimming
BRIGHTER/DARKER dimming n n n n n
Adjustable dimming time n n n n n
Brightness limitation, adjustable min. dimming value/max. dimming value n n n n n
Switching
Switching ON/OFF n n n n n
Configurable starting value n n n n n
Switching ON/OFF possible via BRIGHTER/DARKER dimming n n n n n
Emergency lighting
Support for prescribed test sequences for emergency lights n n n
Controlling single battery lights n n n
Internal memory for test results n n
Status
DALI short circuit n n n n n
2)
DALI power supply n n n n n
Status output (ON/OFF, value, lamp fault, ECG fault) n
Status group (ON/OFF, value, lamp fault, ECG fault) n n n n
Status ECG (ON/OFF, value, lamp fault, ECG fault) n n n
Further Functions
DALI sensors
3)
/2-point-control n n n n
Stand-by shut down (areas) 12 6 12
Function burn-in n n n
Renew defective ECG without software n n n n n
Stand-alone mode n n n n
Pre-loaded applications n n
1)
For current application programs, see www.siemens.com/gamma-td
2)
Per channel (line)
3)
Only selected DALI sensors are supported, see APB www.siemens.com/gamma-td
1010
24_VS_2017_Gamma HQ_EN_Chapter_10_V1.indd 6 26.07.2018 14:38:18