User Manual

9-15
Modular installation system, Room Control Box
Room Control Box
Modules
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
9
Stock No. Product No. DT
5WG1510-2KB23 RS 510K23 A
RS 510K23Thermo Drive Actuator, 2 x 1.5 A, AC 24...230 V / DC 24 V
• 2 switching outputs for control of electro-thermal drives for heating radiator and cooling ceiling valves
• Per output up to 4 connected electro-thermal drives with in total up to 1.5 A in the on-state and up to
58 W power consumption when switched on
• One relay contact per output as switching element
• Rated contact operating voltage AC 24...230 V or DC 24 V
• Rated contact frequency: 50/60 Hz
• Contact rated current according to DIN EN 60669-1: 1.5 A (resistive load)
• Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-
core conductors, 0.5...2.5 mm
2
• With bus connection module
• Bus-powered electronics
• Integrated bus coupling unit, bus connection via bus terminal
• Modular installation device for mounting in AP 118 automation module box or AP 641 room control
box
• Selectable control via switching commands (on-off control) or via contol commands in percent
(continuous control)
• Conversion of control commands in percent into pulse width modulated (PWM) switching commands
• Additional functions for avoiding calcication of a valve and forced position as well as a status object
per output
• Status object as an optional addition for each output
• Selectable switching state for each output on bus voltage failure and recovery
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See chapter Modular Installation System - Room control box - Module boxes.
Rated voltage AC 24 V
Rated current 1.5 A
Number of channels 2
Relay outputs, number 2
Triac outputs, number 0
Dimensions (W x H x D) 50,2 x 48,8 x 35,5 mm
7-Module boxes.indd 15 26.07.2018 14:32:21