User Manual
9-12
Modular installation system, Room Control Box
Room Control Box
Modules
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
9
Stock No. Product No. DT
5WG1520-2AB23 RS 520/23 A
RS 520/23 Shutter Blind Actuator RS, 1 x AC 230 V, 6 A
• 1 channel
• Electrically interlocked relays to reverse the direction of rotation
• Integrated electronics for detection of the actuation of an electromechanical limit switch and with
auto-calibration of the travel time from one limit switch to the other
• Bus-powered electronics
• Integrated bus coupling unit, Bus connection via bus terminal block
• Type of protection: IP 20
• For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a
motor for AC 230 V and electromechanical limit switches
• Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-
core conductors, 0.5 ... 2.5 mm
2
• With bus connection module
• Modular installation device for mounting in AP 118 automation module box or AP 641 room control
box
• Congurable behavior in the event of a bus voltage failure/recovery
• Automatic mode for sunlight tracking control
• Manual and standard mode
• Status: Transmitting status per channel, status position of sun protection, 8-bit, status position of slats,
8-bit
• Integrated 1-bit/8-bit scene control
• 8 scenes to be integrated per channel
• Travel lock (e. g. for cleaning the outer shutter/blinds)
• Separate raising/lowering protection
• Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active
• Individual conguration of actuator channels
• Adaptation of objects and functions to drive type
• Suitable for integration in a sunlight tracking control system
• End position detection
• Using position data (8-bit value) for sun protection control (up/down) and slat control (open/closed)
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See chapter Modular Installation System - Room control box - Module boxes.
Rated voltage AC 230 V
Rated current 6 A
Number of channels 1
Sun position tracking Yes
Automatic detection of end positions Yes
Wind alarm Yes
Dimensions (W x H x D) 50,2 x 48,8 x 35,5 mm
7-Module boxes.indd 12 26.07.2018 14:32:20