User Manual

9-8
Modular installation system, Room Control Box
Room Control Box
Modules
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
9
Stock No. Product No. DT
5WG1125-4AB23 RL 125/23 A
RL 125/23 Decentralized power supply, 80 mA, AC 230 V
• Integrated choke
• Output voltage 29 V DC
• Output current 80 mA
• Connection of choke-protected output voltage via a plug-in extra-low voltage terminal or bus terminal
• Type of protection: IP 20 (installed)
• Rated operational voltage AC 120...230 V, 50...60 Hz, DC 220 V
• For mounting in AP 118 automation module box or AP 641 room control box
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See Chapter Modular Installation System - Room control box - Module boxes.
Dimensions (W x H x D) 86,5 x 47,8 x 36,2 mm
Stock No. Product No. DT
5WG1260-4AB23 RL 260/23 A
RL 260/23 Binary Input, 4 x AC/DC 12...230 V
• 4 Inputs for AC/DC 12...230 V
• Max. cable length, unshielded, twisted 100 m
• Bus-powered electronics
• Integrated bus coupling unit, with bus connection via bus terminal block
• Type of protection: IP 20
• Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-
core conductors, 0.5...2.5 mm
2
• For mounting in AP 118 automation module box or AP 641 room control box
• The following functions can be selected per input:
- Switching state/send binary value/Transmission of the input objects after change
- Switch edge, short/long switch, 8-bit value edge, 8-bit value short/long
- Dimming, shading control, single button group control
- 1/8-bit scene control
- 16-bit oating-point value edge and 16-bit oating-point short/long
- Pulse counting with/without limit value monitoring (8/16/32 Bit)
• The following functions can be selected per input pair:
- 2-pushbutton dimming with stop telegram and 2-pushbutton shading control
• Optional blocking of each input by means of the respective blocking object
• Optional cyclic transmission of input objects
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See Chapter Modular Installation System - Room control box - Module boxes.
Dimensions (W x H x D) 86,5 x 47,8 x 36,2 mm
7-Module boxes.indd 8 26.07.2018 14:32:19