User Manual

8-2
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Heating, ventilation and air-conditioning – primary control
Overview
Product range overview Synco™
KNX -
One system for all types of applications
Synco tool – support functions for quick commissioning
To facilitate commissioning, the Synco tool offers you a host of help functions and choices: Diagnostics including trending, for
example, straightforward fault tracing thanks to access to all data points of all controllers, saving all settings on the PC, or
printing commissioning reports.
Synco operating – efficient operation of plant with straightforward remote control
Thanks to the Synco web server, plant operation and monitoring can be effected from a PC or smartphone at any time and
from any location. An alarm system delivers fault status or maintenance messages in due time, also via SMS or e-mail, if
required. The app allows your customers operation from underway or from the sofa.
Simple concept for opening communication
With Synco, defining and commissioning of com munication is child’s play: Simply inter-connect the units, activate the bus
power supply on the controller and set the device address. All relevant settings can be made directly via local operation.
GAMMA Building Control - simply add more functionality with KNX
With KNX, the functionalities of the system can be significantly enlarged, for example with lighting or shading control. The
GAMMA portfolio offers corresponding actuators, sensors and interfaces, for example DALI and BACnet. Commissioning of
those extensions is done with ETS (Engineering Tool Software). For example, simultaneous control of the ventilation system
and of lighting via the same presence detectors, is possible.
Synco IC - easy and secure remote access
Synco IC is a web-based remote acess system. Just connect your web server with the internet, create your account on the
www.siemens-syncoic.com and enter the key for your web server. Setting up a secure internect access to your plant is there-
fore child‘s play.
Connection of
meters via M-bus
Connection of
Synco, RDG/RDF
& GAMMA
Control of heating, ventilation
and air conditioning primary plant
Connection of many other sites with
Synco, RDG/RDF & GAMMA
für ETS and ACS via OZW
Water meters
Heat cost
allocators
Heat meters
Central control,
RDG/RDF integration
Thermostats for
room climate control
For lighting control and other
room applications
RMB RDG/RDF GAMMA instabus
G
a
t
e
w
a
y
OZW Synco 700
Remote Tool Access
Synco IC
88
18_VS_2019_Gamma HQ_EN_Chapter_8_V1.indd 2 26.07.2018 14:28:30