User Manual

1-7
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Display and operation units
Overview and selection guides
IP Control Center, Web-Visualization
Visualization with a PC Visualization with a tablet
Web visualization for a KNX system
The IP Control Center N 152 allows web visualization of KNX systems on various web-based operating devices. The visualization controller can be
used to design intuitive operating and display interfaces for PCs, laptops, tablets or smartphones on an individual basis.
Up to 1250 values and states can be set for the various building and room functions, as well as a high-performance application module and the
scope also includes an annual time switch program with an astronomic calendar, while the scene control allows you to call up and record up to
5000 scenes and events. A range of data points, e.g. consumption values and weather records can also be shown in the form of curve or bar
charts, while data can be monitored and stored to facilitate fault diagnosis and via an interface, IP devices can be controlled using TCP/UDP
commands. Alarm notifications are signaled both visually and audibly as well as being managed in an alarm history. Alarm notifications can also
be sent as recorded tr
end data or monitor data by email.
Your choice of web content can be shown, such as news or weather forecasts, as well as scope to display images or films from IP cameras.
The commissioning process is performed with the ETS, while a graphic editor and smart editor are permanently installed in the device to help
when developing projects. This also eliminates the need for any additional software.
The web editor allows wide-ranging display and operating elements to be arranged using the drag-and-drop approach, while the user interface
can be individually configured with personal or pre-existing elements from a comprehensive library. The scope also extends to six different
selectable styles and building views and floor plans can be depicted as background images.
The Smart Editor allows you to develop visualizations specially tailored for mobile browsers on smartphones or tablets, swiftly and intuitively.
Visualization with a smartphone
A clear model project is available via download for the IP Control Center.
For applications in industrial environment, e.g. installation in a control board, are powerful operation terminals SIMATIC ITC from 12“ to 22“
available. For further information see:
http://w3.siemens.com/mcms/pc-based-automation/en/industrial-pc/industrial-monitors/simatic-industrial-thin-client/Pages/SIMATIC-Industrial-
Thin-Client.aspx
11
04_VS_2017_Gamma HQ_EN_Chapter_1_V2.indd 7 19.08.2018 14:49:33